Sd Card Care; Memory Expansion - Toshiba 5000 Series User Manual

Table of Contents

Advertisement

User's Manual

SD card care

CAUTION: Set the write-protect switch to the lock position, if you do not
want to record data.
1. Do not write to an SD card if the battery power is low. Low power could
affect writing accuracy.
2. Do not remove an SD card while read/write is in progress.
3. The SD card is designed so that it can be installed only one way. Do not try to
force the card into the slot.
4. Do not leave an SD card partially inserted in the slot. Press the SD card until
you hear it click into place.
5. Do not twist or bend SD cards.
6. Do not expose SD cards to liquids or store in humid areas or in lay media
close to containers of liquid.
7. After using an SD card, return it to its case.
8. Do not touch the metal part or expose it to liquids or let it get dirty.

Memory expansion

You can install additional memory in the computer's memory module socket to
increase the amount of RAM. This section describes how to install and remove a
memory module.
CAUTION: Do not try to install or remove a memory module under the
following conditions. You can damage the computer and the module.
Also, data will be lost.
1.
The computer is turned on.
2.
The computer was shut down using the Stand by mode or Hiberna-
tion mode.
3.
Power to the DVD-ROM or CD-RW/DVD-ROM drives has been
turned on by the Mode Control button and Play/Pause button.
4.
Wake-up on LAN is enabled.
NOTE: Use a 0-bit, Phillips screwdriver to remove and fasten the screws.
Use of an incorrect screwdriver can damage the screw heads.
8-8

Advertisement

Table of Contents
loading

Table of Contents