Toshiba 5000 Series User Manual page 102

Soft keys: Fn key combinations
Standby: Press Fn + F3 to change the Standby mode setting. When you press
these hotkeys, the current setting will be displayed in a dialog box that will let you
select Yes or No to accept or cancel the displayed setting. A check box lets you
select whether to hide or display the dialog box.
Hibernation: Press Fn + F4 to change the Hibernation mode setting. When you
press these hotkeys, the current setting will be displayed in a dialog box that will let
you select Yes or No to accept or cancel the displayed setting. A check box lets you
select whether to hide or display the dialog box.
Display selection: Press Fn + F5 to change the active display device. When you
press these hot keys a dialog box appears. Only selectable devices will be displayed.
Hold down Fn and press F5 again to change the device. When you release Fn and
F5, the selected device will change. If you hold down these hotkeys for five
seconds the selection will return to LCD.
Display Brightness: Pressing Fn + F6 decreases the display brightness in
increments. When you press these hotkeys, the current setting will be displayed for
two seconds by an icon. You can also change this setting through the Monitor
brightness item of the Power Save Mode window in Power Saver.
5-5