When Writing Or Rewiting; Drag'n Drop Cd - Toshiba TECRA S1 Series User Manual

User's Manual
Write from the computer's HDD to the CD/DVD. Do not try to write from
shared devices such as a LAN server or any other network device.
Writing with software other than Drag'n Drop CD is not recommended.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a CD-R/-RW or
DVD-R/-RW/-RAM disc.
Do not perform any of the following actions when writing or rewriting:
• Operate the computer for any other function, including using a mouse or
TouchPad/cPad or closing/opening the LCD panel.
• Start a communication application such as a modem.
• Apply impact or vibration to the computer.
• Install, remove or connect external devices, including the following:
PC card, SD card, USB devices, external display, i.LINK devices, optical
digital devices.
• Use the Audio/Video control button to reproduce music or voice.
• Open the DVD Multi drive
Do not use standby/hibernation while you write or rewrite.
Make sure writing or rewriting is completed before going into standby/
hibernation. Writing is completed if you can open the DVD Multi drive tray.
Set the computer on a level surface and avoid places subject to vibration such
as airplanes, trains, or cars. Do not use an unstable surface such as a stand.
Keep mobile phones and other wireless communication devices away from the
computer.
Always copy data from the HDD to the DVD-RAM. Do not use cut-and-paste.
The original data will be lost if there is a write error.

Drag'n Drop CD

Note the following limitations when you use Drag'n Drop CD:
DVD-Video cannot be created using Drag'n Drop CD.
DVD-Audio cannot be created using Drag'n Drop CD.
You cannot use Drag'n Drop CD's music CD function to record music to a
DVD-R/-RW disc.
4-18