Installing The Battery Pack - Toshiba TECRA S1 Series User Manual

Installing the battery pack

To install a battery pack, follow the steps below.
CAUTION: The battery pack is a lithium ion battery, which can explode
if not properly replaced, used, handled or disposed of. Dispose of the
battery as required by local ordinances or regulations. Use only
batteries recommended by TOSHIBA as replacements.
1. Be sure the computer's power is off and all cables are disconnected.
2. Insert the battery pack.
3. Push down the battery pack until it is firmly seated.
Figure 6-1 Removing the battery pack
Figure 6-2 Installing the battery pack
Replacing the battery pack
B
ATTERY RELEASE
LATCH
B
ATTERY PACK
B
ATTERY PACK
6-15