Selim Select Bay Modules; Dvd-Rom Drive(Black) - Toshiba TECRA S1 Series User Manual

Disk-In-Use
Indicator
Diskette slot
Eject button
CAUTION: Check the Disk-In-Use indicator when you use the diskette
drive. Do not press the eject button or turn off the computer while the
light is glowing. Doing so could destroy data and damage the diskette or
the drive.
NOTES: 1. The external diskette drive should be placed on a flat,
horizontal surface when in use. Do not set the drive on an
incline greater than 20o while it is operating.
2. Do not set anything on top of the diskette drive.
Slim Select Bay modules
The Slim Select Bay can accommodate the following modules: DVD-ROM drive,
CD-ROM drive, CD-RW/DVD-ROM drive, DVD multi drive, optional Slim Select Bay
HDD adaptor and optional Slim Select Bay 2nd battery pack.
DVD-ROM drive (Black)
An optional full-size DVD-ROM drive module lets you run either 12 cm (4.72") or 8
cm (3.15") CD/DVDs without using an adaptor. It may be selected as a standard
component or as an option.
NOTE: The read speed is slower at the center of a disk and faster at the
outer edge. The maximum (outer edge) speeds for DVDs and CDs are:
DVD 8 speed (maximum)
CD
24 speed (maximum)
This drive supports the following formats:
• DVD-ROM
• Photo CD
• CD-ROM
• CD-ROM x A
• CD-EXTRA
This indicator lights when the diskette is being accessed.
Insert diskette in this slot.
When a diskette is fully seated in the drive, the eject
button pops out. To remove a diskette, push in the eject
button and the diskette pops out partially for removal.
• DVD-Video
• CD-R (read only)
• CD-Rewritable (read only)
• CD-DA
• CD-Text
Slim Select Bay modules
2-13