Using Optical Media Drives; Loading Discs - Toshiba TECRA S1 Series User Manual

Using optical media drives

Using optical media drives
The text and illustrations in this section refer primarily to the DVD-ROM drive.
However, operation is the same for the CD-RW/DVD-ROM,CD-ROM,DVD Multi
and optional CD-R/RW drives. The full-size drive provides high-performance
execution of CD/DVD-ROM-based programs. You can run either 12 cm (4.72") or 8
cm (3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used for
CD/DVD-ROM operation. When the computer is accessing a CD/DVD-ROM, an
indicator on the drive glows and the Slim Select Bay indicator glows.
NOTE: Use the WinDVD 4 application to view DVD-Video discs.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs section for
precautions on writing to CDs.

Loading discs

To load CD/DVDs, follow the steps below and refer to figures 4-6 to 4-10.
1. a. When the power is on, press the DVD-ROM eject button to open the
drawer slightly.
E
JECT BUTTON
Figure 4-6 Pressing the DVD-ROM eject button
4-7