Replacing The Cap; Using The Usb Diskette Drive - Toshiba TECRA S1 Series User Manual

Replacing the cap

The AccuPoint cap is an expendable item that should be replaced after prolonged
use.
1. To remove the AccuPoint cap, firmly grasp the cap and pull it straight up.
A P
CCU
P
EG
Figure 4-2 Removing the AccuPoint cap
2. Position a new cap on the peg and press it into place.
NOTE: The peg is square, so be careful to align the cap's square hole
with the peg.

Using the USB diskette drive

A 3 1/2" diskette drive connects to the computer's USB port. It accommodates 1.44-
megabyte or 720-kilobyte diskettes. Refer to Chapter 2,
information.
OINT CAP
Using the USB diskette drive
The Grand Tour, for more
4-3