When Writing Or Rewiting; Writing Cds On Dvd Multi Drive; Important Message - Toshiba TECRA S1 Series User Manual

When writing or rewriting
Note the following when you write or rewrite a CD-R or CD-RW.
Always copy data from the HDD to the CD. Do not use cut-and-paste. The
original data will be lost if there is a write error.
Do not perform any of the following actions:
• Operate the computer for any other function, including use of a mouse or
Touch Pad, closing/opening the LCD panel.
• Start a communication application such as a modem.
• Apply impact or vibration to the PC.
• Install, remove or connect external devices, including the following:
PC card, SD card, USB devices, external display, i.LINK devices, optical
digital devices.
• Use the CD/MP3 control buttons to reproduce music and voice.
• Open the optical media drive.
If the media is poor in quality, dirty or damaged, writing or rewriting errors may
occur.
Set the computer on a level surface and avoid places subject to vibration such
as airplanes trains, or cars. Do not use an unstable surface such as a stand.
Keep mobile phones and other wireless communication devices away from the
computer.
Writing CD/DVDs on DVD Multi drive
You can use the DVD Multi drive to write data to either CD-R/-RW or DVD-R/-RW/-
RAM discs. The following application for writing are supplied on CD-ROM:
Drag'n Drop CD, licensed by Easy Systems Japan Ltd., and DigiOn Inc..

Important message

Before you write or rewrite to CD-R/-RW or DVD-R/-RW/-RAM disc, read and
follow all set-up and operating instructions in this section. If you fail to do so, the
DVD Multi drive may not function properly, and you may fail to write or rewrite,
lose data or incur other damage.
Writing CD/DVDs on DVD Multi drive
4-13