Stanley Supreme DF User Manual page 18

Setting a Stop Time Only
1. Place the food on the correct shelves in the oven.
2. Press the MODE button repeatedly until L3 flashes and
then press the plus + button until the time at which the
cooking is to end. After 5 seconds the LED will stop
flashing.
3. Set the oven temperature control. Cooking will start
immediately.
4. At the end of the cooking time, a beep will sound and will
continue for 2 minutes unless cancelled manually. This
can be cancelled by pressing any of the buttons.
5. Return the oven control knob to the OFF position.
To cancel any automatic programme, press the MODE
button and then the minus - button until the display shows
the time of day. A signal will sound.
Setting the Minute Timer
The minute timer can be set to time periods from 1 minute
to 23.59 hours.
1. Press the MODE button repeatedly until L1 flashes,
above the sign. Set the required time by using the plus
+ and minus - buttons. (NOTE: The L1 will disappear if
the plus + and minus - buttons are not pressed within 5
seconds. The setting will then have to be repeated.
2. The set time will now remain displayed, the LED bar will
remain steady and the timer will start to count down.
3. At the end of the set time, a beep will be heard (2 beeps
every 2 seconds) and will continue sounding for 2
minutes unless cancelled.
4. Press any of the buttons to stop the beep. The LED bar
light will go out.
The minute timer can be used at any time, even if an
automatic cooking programme has been set.
18