2.3 Speed Dialing
There are a number of ways that you can dial a stored number.
2.3.1 System Speed Dials
The system administrator can program up to 100 frequently used number as system speed dial numbers 600 to 699. Any
user in the system can use a system speed dial by pressing FEATURE and dialing the three digit code of the system
speed dial required.
· Except in special cases which the system administrator can configure, system speed dials do not override any
dialing restrictions that apply to an extension.
To Use a System Speed Dial
1. If already on a call, end the call by pressing Drop or put it
button which the call is on.
2. Press FEATURE or # and dial the three digit system speed dial code between 600 and 699.
3. The stored number is dialed.
PARTNER® Mode ETR Phone User Guide
IP Office Basic Edition
on hold
by either pressing Hold or pressing the
23
- Issue 4e (Friday, May 04, 2012)
Page 20