Feature Codes - Avaya ETR 6 User Manual

1.6 Feature Codes

The following feature codes can be dialed from most phones after pressing FEATURE. Most of these features can also be
assigned to programmable buttons.
Feature Code
Do Not Disturb 01
36
" Cancel 01
36
Recall 03
Save Number 04
Redial
Last Number 05
Redial 17
Conference 06
Drop
25
Privacy 07
26
Call Forward 11
31
Call Forward 11
Cancel
31
Account Code 12
Entry
35
Voice Mailbox 14
Transfer 24
VMS Cover 15
39
Caller ID Name 16
Display
Caller ID 17
Inspect
Call Coverage 20
32
Station Lock 21
34
Station Unlock 22
34
Caller ID Log 23
Hot Dial 26
Message Alert 27
Notification
Absent 28
Message 30
Contact Closure 41
1
Contact Closure 42
2
PARTNER® Mode ETR Phone User Guide
IP Office Basic Edition
Description
This function allows you to switch do not disturb on or off.
This function allows you to send a recall or hook flash signal.
This function allows you to save the number dialed during a call and to redial that number
when idle. This can be used when the number dialed does not answer.
This function allows you to redial the last external number dialed.
This function allows you to select and drop a call from a conference.
This function allows you to turn privacy on or off. When on, other extensions are not able to
bridge into your calls.
This function allows you to redirect all your calls to another number. If the system
administrator has configured your for Remote Call Forwarding, you can forward calls
externally by specifying a personal speed dial as the destination.
This function allows you to enter an account code prior to making a call or during a call.
This function allows you to transfer your current call to another extension's mailbox. Your
current call is put on hold and you enter the target extension number to indicate the
mailbox required.
This function allows the you to switch use of voicemail coverage for your extension on or
off.
This function allows you to swap the display of caller ID name and number information on
the phone.
This function allows you to see the caller ID of a call on another line without interrupting the
current call to which you are connected.
This function allows you to switch call coverage on or off. When on, any calls to you that
ring unanswered also start ringing at your call coverage extension.
This function allows you to lock and unlock your extension from being used to make calls.
When selected, you are prompted to enter a four digit code after which the extension is
locked. If the extension is already locked, use of this function prompts for reentry of the
four digit code to unlock the extension.
This function can only be used by the first two extensions in the system. It allows the user
to unlock any extension without needing to know the code that was used to lock that
extension.
This function allows you to view the phone system's call log of all caller IDs of calls received
by the system. To use this you must be one of the three extensions configured for call ID
logging by your system administrator.
This function allows you to dial a stored number without first going off hook or pressing the
SPEAKER button.
This function allows you to see the current state of other user's message waiting lamps. It
is used in conjunction with other users for which you have Auto Dial - Intercom buttons.
This function allows you to set or clear an absent message for display on you phone. When
set, the absent message is also displayed on other extensions when they call the user.
This function you to operate the system's contact closure 1 or 2 connection. To use this you
must be a member of the system's contact closure group.
- Issue 4e (Friday, May 04, 2012)
Page 12