Redialing A Number; Speed Dialing A Person; Autodialing A Pre-Assigned Number - Avaya 9600 Series Manual

Operation
Some call servers call back to confirm the emergency status. The phone automatically
answers the incoming call on the speaker by going off-hook.
3. To end the emergency call, press End Call.

Redialing a number

Procedure
1. From the Phone screen, press Redial.
The phone redials the last number or a list of the most recent numbers that you have
dialed appears from which you can select a number to redial.
Note:
The phone clears the last number dialed and redial list if you clear the Outgoing Call
Log. Also, the redial softkey disappears.
2. If you are working with a redial list, scroll to the number to call and press Call or OK or
press the corresponding line key (LED).
Your system administrator can disable Redial functionality.

Speed dialing a person

Procedure
On the Phone screen, press and briefly hold the dialpad key assigned to the person you want to
call. If speed dial numbers are assigned to a button module attached to your phone, press the
button assigned to the person you want to call.

Autodialing a pre-assigned number

About this task
Your system administrator may set up frequently called numbers such as Information Technology
or the Help Desk as Autodial numbers, so you can dial them with one touch.
Procedure
1. From the Phone screen, scroll right till you gain access to the System Numbers menu.
2. Select the number you want to call.
3. Press the Call softkey or the OK button.
October 2020 Using Avaya 9608/9608G/9611G IP Deskphones SIP
Comments on this document? infodev@avaya.com
46