Table of Contents
Advertisement
s5000 / s6000
RIGHT SEMITONE
RIGHT FINE
RIGHT DELAY
RIGHT FEEDBACK
NOTE: When PITCH+FEEDBACK is selected, this uses the delay line normally used for delay/
echo effects (you will note that the DDL section in the multiFX block diagram is also highlighted
when PITCH+FEEDBACK is selected to indicate this).
In other words, the delay/echo effects described next are not available when
PITCH+FEEDBACK is selected.
Attempting to access the DELAY FX in the main MULTIFX page in this case will pop up this
dialogue:
If you want to use the delay effects, please select another modulation effect type.
In all the modulation effects types, the ACTIVE switch on F10 allows you to bypass the selected
effect from the chain of effects.
MODULATION EFFECTS TEMPLATES
A wide variety of templates are offered that cover the whole range of modulation effects from mild
chorus to thick flanging to rotary speakers, autopan, tremolo, pitch shift and many other special
effects. These can be used 'as is' or can be edited and used as the basis for your own effects.
Simply select a template that is close to what you want and make the necessary tweaks to it for
your own requirements.
Version 1.21
Sets the right channel's pitch shift in semitone increments.
Allows you to fine tune the right channel's tuning.
Sets the delay time for the right channel's feedback.
Sets the amount of feedback for the right channel.
FX
203
Advertisement
Table of Contents
