Table of Contents
Advertisement
s5000 / s6000
JOIN
Pressing JOIN will display this page:
This (and MIX described next) are the only two sample editing pages that don't conform to the
normal page layout due to the fact that you are working with two samples.
Using F1 and F9, you may select the two samples A and B you wish to join. The JOIN process will
splice them end-to-end with or without a crossfade.
The parameters are:
SAMPLE A/B FROM
SAMPLE A/B TO
SAMPLE A/B LEVEL
JOIN A>B/JOIN B>A
PLAY SAMPLE A/B
Version 1.21
These parameters allow you to set the start point for the two samples.
These parameters allow you to set the end point for the two samples.
These parameters allow you to set the level of both samples.
These two check boxes allow you to select whether sample A is followed
by B or sample B is followed by A. Switching one on disables the other.
These two keys allow you to audition the two samples A and B prior to
committing the join function.
EDIT SAMPLE
157
Advertisement
Table of Contents
