Akai S6000 Operator's Manual page 16

INTRODUCTION
F1-F16
DATA WHEEL
CURSOR </> KEYS
NUMERIC KEYPAD
WINDOW
UNDO
EXIT
ENT/PLAY
MARK/JUMP
USER KEYS
DISPLAY CONTRAST
6
Function keys down either side of the LCD give direct access to
parameters. Their actual function varies according to the selected
page.
This is used to enter data.
These are used to move the cursor left or right in parameter fields.
This is particularly useful when editing parameters with long
numeric values such as samples.
These keys are also used in conjunction with the DATA wheel for
naming.
These are used to enter numeric data.
This is used to open the 'window' function.
This has no function in Version 1.20 of the operating system.
This takes you out of the currently selected function and back to
the screen you were in previously.
This allows you to audition the currently selected sound.
These allow you to mark a page, go to another page and then
jump back and forth between them.
These allow you to assign the pages and functions you use most
often for quick, convenient access. For example, if you find yourself
always going to the FILTER, AMPLITUDE ENVELOPE and
REVERB 1 pages, these may be assigned to each of the USER
KEYS.
This 'thumbwheel' control, found on the top/rear of the panel sets
the viewing angle for the LCD.
A screen saver function in UTILITIES allows you to turn the
backlight off at timed intervals to help preserve the LCD.
s5000 s6000
/
Version 1.21