Akai S6000 Operator's Manual page 157

s5000 / s6000
PLAY TO
PLAY FROM
ZOOM IN/OUT
NOTE: Either the START or END points need to be selected for the zoom function to work.
TRIM SAMPLE
The options are:
DISCARD
LOOP START>END
START>LOOP END
CANCEL
Pressing one of these will initiate the selected TRIM function. You will see the usual "Processing
sample" progress display followed by the PLAY/KEEP ORIGINAL/NEW/BOTH and RENAME
12
prompt .
12 The process may be so fast that you may not see a progress display, especially on shorter
samples.
Version 1.21
This allows you to play to the currently selected edit point (i.e. with the
START parameter selected, it will play to the start point; with the END
parameter selected, it will play to the end point).
An edit point must be selected for the PLAY TO function to work.
This allows you to play from the currently selected edit point (i.e. with
the START parameter selected, it will play from the start point; with the
END parameter selected, it will from the end point).
An edit point must be selected for the PLAY FROM function to work.
This allows you to zoom in on the main waveform display. The 'overview'
(i.e. the upper, smaller waveform display) always displays the full sample
regardless of the zoom factor. The waveform display style (LOG or LIN)
is shown between the keys (see later - SAMPLE TOOLS).
This displays the following pop-up menu:
This will discard audio before the TRIM start point and after the TRIM
end point.
This will discard audio either side of the loop (if one is set).
This will discard audio before the TRIM start point and after the LOOP
END point.
This closes the pop-up should you change your mind.
EDIT SAMPLE
147