Table of Contents
Advertisement
FX
ROTARY SPEAKERS
The next modulation effect available is ROTARY SPKRS.
SPEED 1
SPEED 2
ACCELERATION
DEPTH/WIDTH
INIT SPEED
MIDI CONTROL
NOTE: If using MODWHEEL, make sure that this is not used to introduce vibrato to the sound
as well otherwise, as you change the rotary speaker speed, you will also increase/decrease
vibrato which may or may not be desirable.
198
This sets one of the rotary speaker speeds. Typically, this will be used to
set the speed of the slow rotary speaker effect but it may be used as the
fast rotary speaker effect if you wish.
This sets the second of the rotary speaker effect speeds.
On a 'proper' rotary speaker, because of mechanics and inertia, it takes
a certain amount of time for the speaker to change from the slow speed
to the fast speed and vice versa. This parameter allows you to set the
time in seconds it will take to go from SPEED1 to SPEED 2 and vice
versa.
This sets the depth (or width) of the rotary speaker effect. High settings
will give a wide left-right sweep, lower settings will give a narrower sweep.
This parameter sets which of the speeds will be the 'initial' speed when
you select this effect. It also allows you to listen to the speed parameter
you may be adjusting. For example, when setting speed 1, select SPEED
1 and when setting speed 2, select SPEED 2. This allows you to set up
rotary speaker effects without having a MIDI controller to hand.
This selects which MIDI controller will trigger the change from SPEED1
to SPEED2 and vice versa. You may select any of the 128 MIDI
controllers.
s5000 / s6000
Version 1.21
Advertisement
Table of Contents
