EDIT SAMPLE
XFADE LENGTH
XFADE CURVE
Pressing JOIN SAMPLES (F16) will pop-up the usual progress display followed by the PLAY/
KEEP ORIGINAL/NEW/BOTH and RENAME prompt. However you will note a slight difference in
the 'keep' prompt:
The options are basically the same and you can compare the new sample with the originals but
because there are two originals with this process, you have the opportunity to play each one
before deciding to keep or discard them. If in doubt, press KEEP ALL and decide what to do with
the originals afterwards.
158
This allows you to set the crossfade length. The longer the crossfade,
the more the second sample is pulled back into the first. For example:
No crossfade
SAMPLE A
6 seconds
1 Second Crossfade
SAMPLE A
5 seconds
This allows you to select a crossfade curve. The choices are LINEAR,
LOG and SINE.
s5000 / s6000
SAMPLE B
SAMPLE B
Version 1.21