Akai S6000 Operator's Manual page 100

EDIT PROGRAM
LFO SYNC
RATE MOD
DELAY MOD
DEPTH MOD
10 64 LFOs on an unexpanded S5000.
90
SQUARE
A 'bi-polar' square wave that moves above and be-
low the note you are playing.
SQUARE +
This square wave only moves above the note you
are playing. It is suitable for trills and octave jumps,
etc..
SQUARE -
This square wave only moves down from the note
you are playing.
SAW BI
A 'bi-polar' rising sawtooth wave that moves above
and below the note you are playing.
SAW UP
This sawtooth rises up to the note you are playing.
SAW DOWN
This sawtooth falls down from the note you are play-
ing.
RANDOM
Gives out completely random control signals.
When set to ON, all 128 LFOs
same rate. When switched to OFF, they each run at a slightly different
speed to create a more 'ensemble' effect on sounds such as strings,
brass, pads, etc..
You may modulate LFO 1's rate with this parameter and here you may
select a controller and set the amount of rate modulation. Press the key
once to set the mod amount; press again to select the controller.
You may modulate the delay time. Press once to set the amount of de-
lay modulation; press again to select the controller.
You may modulate the LFO's output level here. The same principle ap-
plies - press once to set the depth mod amount; press again to select
the controller.
s5000 / s6000
10
(one per voice) run together at the
Version 1.21