Fade Up/Down - Akai S6000 Operator's Manual

EDIT SAMPLE

FADE UP/DOWN

Pressing the FADE UP/DOWN key will show this display:
The parameters are:
FADE UP/DOWN
NOTE: If the sample has a loop, you cannot set FADE UP or FADE DOWN times within the
loop.
FADE CURVE
You may zoom in and out of the waveform for detailed editing.
Pressing FADE SAMPLE will show the usual "Processing sample" progress display followed by
the PLAY/KEEP ORIGINAL/NEW/BOTH and RENAME prompt.
162
These parameters set the length of the fade.
There are two FADE CURVE parameters - one for FADE UP and one for
FADE DOWN and both allow you to select from a choice of fade curves
(LINEAR, LOG and SINE). These give the following results:
Linear Fade Up
Log Fade Up
Sine Fade Up
s5000 / s6000
Version 1.21