Table of Contents
Advertisement
10.Sel Mode
10-5-1 Auto Repeater Set
You can select whether or not the automatic repeater access setting operates.
There are two modes in this transceiver:
'On: The transceiver will automatically apply the shift direction and frequency
offset to the receive frequency when transmitting.
'Off : No offset occurs
lL
1.Rotate
the
upper
dial
and
select
"Repeater".
"Repeater" will be displayed as shown on the
right.
2.Rotate the lower dial and select On
<-->
Off
m
••
~
439.000
Auto rpt. set
OFF
o
C AunON
·Before operating while using the Auto repeater settings, please be
aware of local band plans.
Auto-dialer 1
145.000
82
( 10-6 DTMF (Dual Tone Multi Frequency)
This setting applies to transmitting DTMF tones (the same sounds that can be
heard from the push buttons of an ordinary telephone). This function is used in
accessing certain repeater functions in some areas or linking stations via the
internet.
1.Select "DTMF" from the Set mode menu.
2.By pressing the dial, the sub menu of "Encoding tone" will appear.
10-6-1 Auto-Dialer
This section explains how to register, transmit and record DTMF tones in the
memories.
Up to 16 characters can be input in one DTMF memory and 9 memory codes can
be registered .
• Setting the auto-dialer memory
1.Rotate the upper dial and select "DTMF".
"DTMF" will be displayed as shown on the
right.
Advertisement
Table of Contents
