Stamina Elliptical /Stepper Owner's Manual page 10

ASSEMBLY INSTRUCTIONS
STEP 9
"L"
There is a decal on the
LEFT
Attach the and
SOCKET HEAD BOLTS(M6 x 35mm)(81)
with
NOTE:
Assemble the
the arrows. The Bolt Heads must go through the holes on the
HANDLEBARS(5, 6).
the
STEP 10
"AA"
Install two batteries into the
PULSE SENSOR WIRES(32)
and the
UPRIGHT(4).
the
NOTE: 1. Be careful not to damage the wires when attaching the
See page 15 for detailed battery installation instructions.
2.
L
LEFT HANDLEBAR(5),
RIGHT HANDLEBARS(5, 6)
SOCKET HEAD BOLTS(M6 x 35mm)(81)
METER(31),
into the
"R"
and a decal on the
LEFT
onto the
NYLOCK NUTS(M6)(72).
and
two batteries included. Plug the
METER(31).
Slide the
METER(31).
10
R
RIGHT HANDLEBAR(6).
RIGHT PIVOTING ARMS(7, 8)
and
following the direction as shown by
PIVOTING ARMS(7, 8)
CONNECTION WIRE(30)
METER(31)
onto the plate on
to attach