Voice Dial Operation; Adjusting The Volume When Receiving A Call; Call Switching Operation; Usb Memory (Optional) - Alpine CDE-126BT Owner's Manual

Voice Dial Operation

1
Press and hold VOICE DIAL for at least 2 seconds.
The speak mode is activated, and "SPEAK" is displayed.
2
Say the telephone number, name you want to call into the
microphone.
Notes
• You can perform this operation only when a voice dial compatible
mobile phone is connected. If the mobile phone is not compatible with
the voice dial, "NO SUPPORT" is displayed for 2 seconds.
• The Voice Dial function performance depends on the recognition range
of the mobile phone and mounting location of the microphone. Please
pay attention when the microphone is mounted.
• Voice dial operation depends on the function of the mobile phone. For
details, refer to the Owner's Manual of the mobile phone.
• If a called person that you say is not found, "NO CALL" is displayed for
2 seconds.
• If you place a call via voice dial, you cannot display a phone number or
name.

Adjusting the volume when receiving a Call

Turn the Rotary encoder to adjust the volume.
Note
• You may need to increase volume from your regular audio listening
source level. However, increasing the volume excessively may result in
feedback. If feedback is noticed as feedback is directly related to the
volume, turn down the volume as low as acceptable to eliminate it.
Positioning the microphone in a direction away from the main car
speakers (e.g. clipped on sun visor) may also reduce feedback at high
volume.

Call Switching Operation

While calling, press and hold ENT for at least
2 seconds to switch the call sound between the unit and
mobile phone.
Note
• Depending on the mobile phone, this operation may not be performed.
24
-EN

USB Memory (optional)

SOURCE/
/ENT
Playing MP3/WMA/AAC Files with the USB
Memory (optional)
MP3
CDE-126BT

CDE-125BT

1
Press SOURCE to switch to the USB AUDIO mode.
2
To pause playback, press ENT.
Pressing ENT again will resume the playback.
Notes
• The root folder is displayed as "ROOT" in the Folder Name Search
mode.
• When a search is made in the USB mode, any song being played back
will be stopped.
• This unit plays back files in the USB Memory with the same controls
and modes as playback of CDs containing MP3/WMA/AAC. For
details, refer to "CD/MP3/WMA/AAC" on page 12.
• Before disconnecting USB Memory, be sure to change to another source
or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.

USB Memory Connection (optional)

Connect USB Memory

1
Open the cover of the USB Connection Terminal.
WMA AAC
 