Playback; Searching For A Desired Song; Quick Search; Direct Search Function - Alpine CDE-126BT Owner's Manual

Playback

1
Press SOURCE to switch to the iPod mode.
2
Press  or  to select the desired song.
Pressing and holding  or  will fast backward/fast
forward the current track.
3
To pause playback, press ENT.
Pressing ENT again will resume playback.
Notes
• A song playing on the iPod/iPhone while it is connected to this unit will
continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected Podcast or Audiobook, the
episode can be changed by pressing 1AF or 2.
• An episode may have several chapters. The chapter can be changed by
pressing  or .

Searching for a desired Song

Hierarchy 1 Hierarchy 2
Playlist Song
* *
Artist Album
*
Album Song
Song —
Podcast Episode
* *
Genre Artist
* *
Composer Album
Audiobook —
For example:
Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Press ESC to activate the search selection mode.
The "" indicator lights up.
2
Turn the Rotary encoder to select the ARTIST search
mode, and then press ENT.
PLAYLIST  ARTIST  ALBUM  SONG  PODCAST  GENRE
 COMPOSER  AUDIOBOOK  PLAYLIST
3
Turn the Rotary encoder to select the desired Artist, and
then press ENT.
4
Turn the Rotary encoder to select the desired Album, and
then press ENT.
5
Turn the Rotary encoder to select the desired Song, and
then press ENT.
26
-EN
Hierarchy 3 Hierarchy 4
— —
Song —
— —
— —
— —
*
Album Song
Song —
— —
Notes
• After pressing and holding ENT for at least 2 seconds while in
each hierarchy (except SONG and AUDIOBOOK hierarchy), all songs
of the selected hierarchy are played back.
• After selecting [ALL] in the search mode with" ", press and hold
ENT for at least 2 seconds to play back all songs in the iPod/
iPhone or selected search mode.
• While in the search mode, if you press and hold ESC for 2 seconds,
or no operation is performed for 10 seconds, the search mode is
cancelled.
• In the search mode, pressing SOUND will return to the previous
mode.
• When search is made during M.I.X. play, the M.I.X. play mode will be
cancelled.
• "NO SONG" will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
• "NO PODCAST" will be displayed if there is no podcast data in the
iPod/iPhone in the PODCAST search mode.
• "NOAUDIOBOK" will be displayed if there is no audiobook data in the
iPod/iPhone in AUDIOBOOK search mode.
• If "iPod name" stored in the iPod/iPhone is selected in the desired
Playlist search mode, and ENT is pressed, you can search for all
songs in the iPod/iPhone. Also, if you press and hold ENT for at
least 2 seconds, all songs in the iPod/iPhone are played back.
• Depending on the iPod/iPhone, podcast search is not supported.
• If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
location. For details, refer to "Direct Search Function" on page 26.

Quick Search

1
Press and hold ESC for at least 2 seconds to activate
the Quick Search mode.
The "" indicator lights up.
2
Turn the Rotary encoder to select a desired song.
The selected song is played back immediately.
Notes
• Press and hold ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is cancelled if no operation is performed for
10 seconds.
• If many songs are in the iPod/iPhone, it takes time to search for songs.
• If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
location. For details, refer to "Direct Search Function" on page 26.
• This function is inactive during repeat () playback.

Direct Search Function

In the search mode, press any one of the preset buttons (1
through 6) to quickly skip over a designated percent of
your song content.
Song search example:
If there are 100 songs in your iPod/iPhone, they are divided into 6
groups using percentages (shown below). These groups are
assigned to the preset buttons (1 through 6).