Setting The Language (Cyrillic); Mp3/Wma/Aac; Playing Mp3 Data (Play Mode); External Device - Alpine CDE-126BT Owner's Manual

Setting the Language (CYRILLIC)

 Setting item: CYRILLIC
Setting contents:
OFF (Initial setting) / ON
OFF :
English, Latin character
ON :
Russian, English
Note
• Refer to the table below for the Russian display on this unit.
Таблица символов для
русского языка
Дисплей
D:
Символ
C:
D C D C

MP3/WMA/AAC

Playing MP3 Data (PLAY MODE)

 Setting item: PLAY MODE
Setting contents:
CD-DA (Initial setting) / CDDA/MP3
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA/MP3:
CD data, MP3/WMA/AAC files in mixed mode, and multi-session
discs can be played back.
Note
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
D C D C

External Device

Connecting to an External Amplifier (POWER IC)

 Setting item: POWER IC
Setting contents:
POW ON (Initial setting) / POW OFF
POW ON :
The speakers are driven by the built-in amplifier.
POW OFF :
Use this mode when the line output of this unit is used to drive an
external amplifier. In this setting, the head unit's internal amplifier
is turned OFF and cannot drive speakers.
POW ON :
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
POW OFF :
CDE-126BT:
Amplifier
Amplifier
CDE-125BT:
Amplifier
Note
• No sound is produced by the system when the power output is set to
OFF.
Speakers
Front
right
Rear
right
Rear
left
Front
left
Front
left
Front
right
Rear
left
Rear
right
Front
left
Front
right
19
-EN