Voice Dial Operation; Redialing A Number In Outgoing History; Dialing A Number In Incoming History; Dialing A Number In Incoming Missed Call History - Alpine CDE-136BT Owner's Manual

When "BT MENU" is set to "DEUTSCH".
SPRACHWAHL / GEWAEHLT / ANGENOMMEN /
VERPASST / TEL-BUCH
When "BT MENU" is set to "FRANCAIS".
CP-VOCALE / COMPOSES / RECUS / MANQUES /
REPERTOIRE
When "BT MENU" is set to "ESPANOL".
MARC VOCAL / REALIZADAS / RECIBIDAS / PERDIDAS /
AGENDA
When "BT MENU" is set to "ITALIANO".
C VOCALE / EFFETTUATE / RICEVUTE / PERSE / RUBRICA
When "BT MENU" is set to "NEDERLANDS".
VOICE DIAL / GEKOZEN / ONTVANGEN / GEMISTE /
TEL BOEK
Note
• For details, refer to "Setting the BLUETOOTH Menu language" on
page 30.
3
Press ENTER.
The outgoing mode is activated, and each mode list is displayed.
Note
• It may take some time for the list to be displayed, and also directly after
connection, the list may not be brought up to date.
4
Turn the Rotary encoder to select a name or a telephone
number from the list.
Note
• You can use Phone book alphabet search function to search a name or
number from Phone Book. For details, refer to "Phone book alphabet
search function" on page 33.
5
Press ENTER.
The selected telephone will be called.
If one name has several numbers registered in the telephone
book, press ENTER after selecting the name
Rotary encoder to choose the desired number and press
ENTER, the telephone will be called. Press and hold
ENTER for at least 2 seconds after selecting the name, the
default number of the name will be called. Depending on the
connected mobile phone, this function may not be performed.
* If the name cannot be recognised, default number will be
displayed.
Notes
• Press  to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
• The names registered in the telephone book are displayed. If the name is
not registered, a number is displayed. If both name and number cannot
be displayed, "ID UNSENT" will be displayed.
• If you place a call directly from the paired mobile phone, the phone
number is not displayed, you cannot redial from the unit in this case.

Voice Dial Operation

You can make a call using voice commands.
 Setting item: VOICE DIAL
When the speak mode is activated and "SPEAK" is
displayed, say the telephone number
call into the microphone.
* This message depends on the voice tag prestored in the mobile
phone.
32
-EN
Notes
• You can perform this operation only when a voice dial compatible
• The Voice Dial function performance depends on the recognition range
• Voice dial operation depends on the function of the mobile phone. For
• If a called person that you say is not found, "NO CALL" is displayed for
• If the voice is not detected or recognised by microphone within 30

Redialing a Number In Outgoing History

Previously dialled telephone numbers are stored in dialled calls history.
You can redial a number by searching from dialled calls history.
 Setting item: DIALLED

Dialing a Number In Incoming History

Telephone numbers from received calls are stored in the Received List.
You can redial these numbers by searching here.
 Setting item: RECEIVED
Dialing a Number In Incoming Missed Call
History
Telephone numbers for received calls that are missed, are stored in the
Missed List. You can redial these numbers by searching here.
 Setting item: MISSED
*
, then turn the

Dialing a Number In The Phone Book

Up to 1,000 names (at most 5 telephone numbers for each name) are
downloadable from a mobile phone. Dial a call by selecting a person
from the phone book list.
 Setting item: PHONE BOOK
Notes
• The order of the list display depends on the setting of "PB ORDER"
• If the call history or phone book of the mobile phone is added or deleted
• You can display the information of a number stored in phone book by
* The telephone label of a number depends on the number information
* *
, name you want to
mobile phone is connected. If the mobile phone is not compatible with
the voice dial, "NO SUPPORT" is displayed for 2 seconds.
of the mobile phone and mounting location of the microphone. Please
pay attention when the microphone is mounted.
details, refer to the Owner's Manual of the mobile phone.
2 seconds.
seconds, "NO CALL" will be displayed for 2 seconds, and then the unit
returns to the normal mode automatically.
(refer to "Changing the Phone book List Order" on page 30).
while it is connected to the unit, the list displayed on the unit may not
be brought up to date. If it is not updated, you cannot correctly place a
call.
pressing VIEW. Each press changes the display as Name  Telephone
*
NO.  Telephone label  Name
If the information can not be obtained, "NO NAME", "NO NUMBER"
or "NO LABEL" will display.
stored in Phone book of the mobile phone, which includes 5
types-GENERAL, MOBILE, HOME, OFFICE, and OTHER.