Installation And Connections; Warning; Caution; Precautions - Alpine CDE-126BT Owner's Manual

Installation and Connections

Before installing or connecting the unit, please read the following
and refer to "Operating Instructions" on page 5 for proper use.
WARNING
MAKE THE CORRECT CONNECTIONS.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY
TERMINAL.
DO NOT SPLICE INTO ELECTRICAL CABLES.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO
MAKE GROUND CONNECTIONS.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF
CHILDREN.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE
OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER.
CAUTION
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP
METAL EDGE.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST.
PRECAUTIONS
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number or the
engraved serial number is located on the bottom of the unit.
SERIAL NUMBER: [
INSTALLATION DATE: [
INSTALLATION TECHNICIAN: [
PLACE OF PURCHASE: [
]
]
]
]
31
-EN