Pi Seek Setting; Receiving Traffic Information; Receiving Traffic Information While Playing Cd Or Radio; Displaying Radio Text - Alpine CDE-126BT Owner's Manual

4
Press and hold FUNC.SETUP for at least 2 seconds to
return to normal mode.
Notes
• Press SOUND to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.

PI SEEK Setting

1
Press and hold FUNC.SETUP for at least 2 seconds to
activate the SETUP mode.
2
Turn the Rotary encoder to select the PI SEEK mode, and
then press ENT.
3
Turn the Rotary encoder to select ON or OFF.
4
Press and hold FUNC.SETUP for at least 2 seconds to
return to normal mode.
Notes
• Press SOUND to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.

Receiving Traffic Information

1
Press and hold BANDTA for at least 2 seconds so that the
"TA" indicator lights up.
2
Press  or  to select your desired traffic information
station.
When a traffic information station is tuned in, the "TP" indicator
lights up.
Traffic information is heard only when it is being broadcast. If
traffic information is not being broadcast, the unit is set in the
standby mode. When a traffic information broadcast begins, the
unit automatically receives it and the display shows "TRF-INFO"
for 5 seconds.
When the traffic information broadcast is over, the unit will
automatically set in the standby mode.
Notes
• If you do not want to listen to the traffic information being received,
lightly press BANDTA to skip that traffic information message. The TA
mode will remain in the ON position to receive the next traffic
information message.
• If the volume level is changed while receiving traffic information, the
changed volume level will be memorized. When traffic information is
received next time, the volume level will be automatically adjusted to
the level memorized.
• In the TA mode, the SEEK tuning selects only the TP stations.
Receiving Traffic Information While Playing
CD or Radio
1
Press and hold BANDTA for at least 2 seconds so that the
"TA" indicator lights up.
2
Press  or  to select a traffic information station if
necessary.
When a traffic information broadcast starts, the unit
automatically mutes the CD player or the regular FM broadcast.
When the traffic information broadcast finishes, the unit
automatically returns to the original source play before the
traffic information broadcast began.
When traffic information stations cannot be received:
In the CD mode:
When the TP signal can no longer be received, the traffic
information station of another frequency will be selected
automatically.
Note
• The receiver is equipped with the EON (Enhanced Other Networks)
function in order to keep track of additional alternate frequencies to
the AF list. The "EON" indicator lights up while an RDS EON station is
being received. If the station being received does not broadcast the
traffic information, the receiver automatically tunes in the related
station that broadcasts the traffic information when it occurs.
3
Press and hold BANDTA for at least 2 seconds to
deactivate the Traffic Information mode.
The "TA" indicator goes out.

Displaying Radio Text

Press VIEW while receiving FM in the radio mode to select
the Radio Text display.
The display will change every time the button is pressed.
If there is PS (Programme Service Name):
PS (Programme Service Name)
(Programme Service Name)
If VIEW is pressed and held for at least 2 seconds while
displaying PS in the radio mode, frequency will be displayed for
5 seconds.
If there is no PS (Programme Service Name):
FREQUENCY  RADIO TEXT  FREQUENCY
The display shows "WAITING" for a few seconds, then starts
scrolling the text message.
Note
• If there is no receivable text message or the unit cannot receive a text
message properly, the display shows "NO TEXT".
*
 RADIO TEXT  PS
11
-EN