Playing Mp3 Files With The Cd Changer (Optional); Multi-Changer Selection (Optional); Remote Control; Controls On Remote Control - Alpine CDA-117Ri Owner's Manual

Mp3/wma/aac cd receiver
Hide thumbs Also See for CDA-117Ri:
Table of Contents

Advertisement

Note
• After selecting the desired disc, you can operate in the same way as for
the CD player of this unit. For details, see the CD/MP3/WMA/AAC
section.
Playing MP3 Files with the CD Changer
(optional)
1
Press SOURCE to switch to the MP3 Changer mode.
2
Press any one of the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
3
To pause playback, press .
Pressing  again will resume playback.
Notes
• The unit can play discs containing both audio data and MP3 data.
• For operating MP3 with an MP3 compatible CD Changer, refer to "CD/
MP3/WMA/AAC" on page 13.

Multi-Changer Selection (optional)

1
Press SOURCE on this unit to activate the CD Changer
mode.
Alternatively, press SOURCE on the remote control (RUE-4202)
to activate the CD Changer mode.
SOURCE
2
Press BANDTA to activate the CD Changer Selection
mode.
The CD Changer Selection mode remains active for several
seconds.
3
Press BANDTA until the desired CD Changer indicator
appears on the display.
Notes
• If the selected CD Changer is not connected, the display will show "NO
CHANGER-(No.)".
• To operate the selected changer, refer to "CD/MP3/WMA/AAC" on
page 13.
• For further details about the external input (AUX) when using
KCA-410C, refer to "Setting the AUX Mode (V-Link)" on page 22.
38
-EN

Remote Control

Controls on Remote Control

 Source Button
Press this button to select the audio source.
 Volume Adjustment Buttons
To increase the volume level:
Press the  button
To decrease the volume level:
Press the  button
  Button
Radio mode:
Pressing this button will select, in ascending order, stations
programmed into the radio's presets as shown below.
   ...   
CD Changer mode:
DISC Select (UP) button.
Press this button to select a disc in ascending order.
MP3/WMA/AAC mode:
Folder Select (UP) button.
Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (UP) / DISC Select (UP) button. Press this button to
select a folder in ascending order. Press and hold this button to
select a disc in ascending order.
BAND
iPod mode:
Switches Playlist/Artist/Album/Genre/Composer.
  DN Button
Radio mode:
SEEK (DN) Button.
CD/iPod mode:
Press this button to go back to the beginning of the current track.
  Button
Press this button to switch between the Play and Pause modes for
CD.
 Audio Processor Button
Each press of the button changes the audio processor mode.
For details, refer to "Operating the Audio Processor" as shown below.
Press the button to activate the external audio processor mode when
the external audio processor is connected.
For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased. When the
*

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents