Cd/Mp3/Wma/Aac; Playback; Repeat Play; Random Play) - Alpine CDA-117Ri Owner's Manual

CD/MP3/WMA/AAC

SOURCE/ Rotary encoder/ENTER/
/ESC
(OPEN)

VIEW
 
 
FUNC.

Playback

1
Press  (OPEN).
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.

Note
• When a disc is already inserted, press SOURCE to switch to the
DISC mode.
3
While playing back MP3/WMA/AAC, press  or  to select
the desired folder.
Pressing and holding  or  will change folders continuously.
4
Press  or  to select the desired track (file).
Pressing and holding  or  will fast backward/fast
forward track continuously.
Note
• If a song is fast reversed to its beginning in pause mode, the song will be
played back automatically.
5
To pause playback, press .
Pressing  again will resume playback.
6
After pressing  (OPEN) to open the front panel, press 
to eject the disc.
Notes
• Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
• Three-inch (8 cm) CDs cannot be used.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from iTunes
Store and files that are copy-protected (copyright protection) cannot be
played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
 4 5 
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
• Press VIEW to switch the display. For details, refer to "Displaying the
Text" on page 19.

Repeat Play

1
Press  4.
The song is played back repeatedly.
*1 *2
 RPT   RPT 
RPT
Only a track/file is repeatedly played back.
Only files in a folder are repeatedly played back (MP3/WMA/
AAC mode only).
A disc is repeatedly played back (When a CD changer is
connected.).
Notes
• If RPT is set to ON during M.I.X. play in CD changer mode, M.I.X.
will apply to the current disc only.
• If a CD changer or an MP3 compatible CD changer is connected: Press
FUNC. to select the desired function (RPT/M.I.X.). Perform this
operation within 5 seconds.
2
To cancel repeat play, select (off) with the above
procedure.

M.I.X. (Random Play)

1
Press 5 .
The songs are played back in random sequence.
*1 *2
 MIX   MIX 
MIX
The tracks are played back in random sequence (CD mode
only).
Only files in a folder are played back in random sequence (MP3/
WMA/AAC mode only).
For CD, the tracks on all the CDs in the current magazine will
be included in the random playback sequence. (When a CD
changer equipped with the ALL M.I.X. function is connected.);
For MP3/WMA/AAC, files are played back in random
sequence. If an MP3 compatible CD changer is connected, all
files in a disc are played back in random sequence, and playback
shifts to the next disc.
Note
• If M.I.X. is set to ON during RPT  (REPEAT ALL) play in CD
changer mode, M.I.X. will apply to the current disc only.
2
To cancel M.I.X. play, select (off) with the above procedure.
Note
• If a CD changer or an MP3 compatible CD changer is connected: Press
FUNC. to select the desired function (RPT/M.I.X.). Perform this
operation within 5 seconds.
*3
 (off )  RPT
*3
 (off )  MIX
13
-EN