Changer (Optional); Controlling Cd Changer (Optional); Playing Mp3 Files With The Cd Changer (Optional); Multi-Changer Selection (Optional) - Alpine CDA-9886M Owner's Manual

SOURCEI<!>
.'11
1BAND
O~i;/~r
.-' - ; " / / -- "
C -1 f:J\
!\~
II
i',;: /
/;'T~c:pe==p
;' "- ?
F/SETUP

Controlling CD Changer (Optional)

An optional6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible, With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400c (Multi-Changer Switching device) or the
OC
KCA-4\ (Versatile Link Terminal) multiple changers can be
controlled by this unit.
See "Multi-Changer Selection (Optional)" on page 36 for selecting the
CD Changers,
• The controls on this unitfor CD Changer operation are operative
only when a CD Changer is connected,
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press to activate the CHANGER mode.
SOURCE/<!>
• The source indicator I'aries depending on the connected source,
• Press BAND to switch the Disc mode in the Changer mode,
2
Press to activate Disc Select mode.
F/SETUP
Disc Select Mode
~
(Disc No,1-6)
RPT/M,IX Mode
~
3
Press the disc select buttons (1 through 6)
corresponding to one of the discs loaded in the CD
Changer.
The selected disc number appears in the display and
CD/MP3 playback starts,
• Alter selecting the desired disc, you can operate in the same way as
jor the CD player of this unit, For details, please see the CDIMP31
WMAlAAC section,
*
When a 12-disc CD changer is connected,
36-EN
"_!!-C:~,
- ""__
_J
I-
~_::
Select buttons
(1 through 6)
Disc Select Mode"
~
(Disc No7-12)
Disc Select Mode
(Disc No,1-6)
Playing MP3 Files with the CD Changer
(Optional)
If you connect a changer compatible with MP3, you can play,
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
1
Press to switch to the MP3 Changer
SOURCE/<!>
mode.
2
Press anyone of the disc select buttons
(1 through 6) corresponding to one of the discs
loaded in the CD Changer.
3
To pause playback, press
~/II
Pressing again will resume playback,
• The unit can play discs containing both audio data and MP
• For operating MP 3 with an MP3 compatible CD Changer. refer
"CDIMP3IWMAlAAC" pages 10 to 13,

Multi-Changer Selection (Optional)

Alpine's Ai-NET system will support up to 6 CD Changers, When
operating two or more changers. the KCA-400c (Multi-Changer
Switching device) must be used, If you use I Switching device. you can
connect up to 4 CD Changers, If you use 2 Switching devices, you can
connect up to 6 CD Changers, When using KCA-41
Terminal), you can connect two changers and two external outputs
(AU
X),
1
Press SOURCE/<!> on this unit to activate the CD
Changer mode.
Alternatively, press SOURCE on the remote control
(RUE-4202) to activate the CD Changer mode,
----tr-+----,
SOURCE
2
Press BAND on this unit or the RUE-4202 to activate
the CD Changer Selection mode.
The CD Changer Selection mode remains active for a few
seconds,
3
Press BAND until the desired CD Changer indicator
appears on the display.
Alternatively press
BAND
desired changer indicator appears on the display,
• If the selected CD Changer is not connected, the display will show
"NO CHANGER (No,)",
• To operate the selected changer. see "CDIMP3IWMAlAAC"
(pages 10 to 13),
• For/imher details "bout the extel11al input (AUX) when
KCA-410C, see "Selling the AUX Mode (V-Link)"
~/II.
3 data,
to
OC
(Versati Ie Link
'-':=-+11-- BAND
on the Remote Control until the
u~'illK
page 20,
011