Displaying The Text; Imprint Operation (Optional); Changing Multeq Mode - Alpine CDA-117Ri Owner's Manual

Displaying the Text

1
Press VIEW.
Each press changes the display.
Note
• When the Text Scroll is set to Manual, press and hold VIEW for at least
2 seconds, the current text will be scrolled one time.
Track No./All Songs No. *2
Elapsed Time
Calendar
Clock
Album Name *1
Song Name *1
TAG information
If the Text Scroll (refer to "Scroll Setting (Text Scroll)" on
page 24) is set to "Auto, " the tag information will scroll
automatically.
If there is no text information, nothing will be displayed.
The numbers of all songs displayed vary depending on the songs
selected by the search.
When the Text Scroll (refer to "Scroll Setting (Text Scroll)" on
page 24) is set to "Auto, " the display cannot be switched by
pressing VIEW. The display contents switch alternately.
Notes
• Only alphanumeric characters (ASCII) can be displayed.
• The maximum number of characters for the head unit is 128 (128 byte).
• Some characters may not be correctly displayed.
• The display is blank when text information is not compatible with this
unit.
30
-EN
(Blank)
(Blank)
Artist Name *1
*1
Song Name
*3
Track No./All Songs No. *2
Elapsed Time
IMPRINT Operation
(optional)
BAND/TA
SOURCE/
/ESC
*3
 

Changing MultEQ mode

1
Press and hold SOUND SETUP for at Least 2 seconds to
activate the Sound menu selection mode.
2
Turn the Rotary encoder to select MultEQ Mode, and then
press ENTER.
3
Turn the Rotary encoder to select the desired MultEQ
mode, and then press ENTER.
OFF (Manual Mode)  Curve 1 (MultEQ-1)  Curve 2 (MultEQ-2)
Notes
• The Curve mode can be selected only when Curve 1 and Curve 2 are
stored.
• When using MultEQ, MX, X-Over, T.Correction, Factory's EQ, SUBW.
Phase, SUBW. Channel, TW Setup, EQ Mode, Filter Type and
Parametric EQ/Graphic EQ are set automatically. They are no longer
user adjustable.
• When an external audio processor is connected, the MultEQ function
cannot be used.
Rotary encoder/ENTER/
Preset buttons (1 through 6)
AUDIO/SOUND SETUP