IMPRINT audio processor (PXA-H100) (sold separately) is
connected, refer to "IMPRINT Operation (optional)" on page 30.
Power Button
Press this button to turn the power on/off.
Band Button
Radio mode:
BAND Button.
Press this button and the band will change.
Changer mode:
To switch the changer.
UP Button
Radio mode:
SEEK (UP) button.
CD/iPod mode:
Press this button to advance to the beginning of the next track.
Button
Radio mode:
Pressing this button will select, in descending order, stations
programmed into the radio's presets as shown below.
...
CD Changer mode:
DISC Select (DN) button.
Press this button to select a disc in descending order.
MP3/WMA/AAC mode:
Folder Select (DN) button.
Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (DN) / DISC Select (DN) button.
Press this button to select a folder in descending order.
Press and hold this button to select a disc in descending order.
iPod mode:
Switches Playlist/Artist/Album/Genre/Composer.
Mute Button
Press this button to lower the volume by 20 dB instantly.
Press this button again to cancel.
Operating the Audio Processor
1
Press A.PROC to select the mode.
Normal mode Time Correction X-OVER Normal mode
2
Press or to select the item.
Time Correction mode/Crossover (X-OVER) mode:
Select from MEMORY 1 through 6.
Battery Replacement
1
Opening the battery cover
Slide out the battery cover while firmly pressing in the direction
of the arrow.
2
Replacing the battery
Insert the batteries, observing the polarities as illustrated.
3
Closing the cover
Slide the cover as illustrated until a click is heard.
Controllable With Remote Control
Remote control sensor
Connectable to Remote Control Interface
Box
39
-EN