Listening To The Radio; Presetting Stations Manually; Presetting Stations Automatically; Tuning To Preset Stations - Alpine iLX-107 Owner's Manual

Listening to the Radio

1
Press the Home button.
The Home screen is displayed.
2
Touch [Radio].
The radio mode is activated and the display changes to the
Radio mode screen.
3
Touch [ ] to select the desired radio band.
Each touch changes the bands as follows:
FM-1 FM-2
4
Touch [Tune] to select the tuning mode.
DX Seek Local Seek
• There are two modes you can select for auto tuning, DX and
Local:
- DX (Distance) mode;
Both strong and weak stations will be tuned in.
- Local mode;
Only strong stations will be tuned in.
The initial setting is DX.
• If "Preset" or "PTY" appears, touch [Tune] repeatedly until a
tuning mode is displayed.
5
Touch [ ], [ ] or [
frequency up or down respectively.
In manual mode, touch and hold to change the frequency
continuously.

Presetting Stations Manually

1
Tune in a desired radio station you wish to store in
the preset memory by manual or automatic seek
tuning.
2
Touch and hold any one of the preset buttons for at
least 2 seconds.
The selected station is stored.
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the
desired band and repeat the procedure.
A total of 18 stations can be stored in the preset memory
(6 stations for each band; FM-1, FM-2 or AM).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.
AM FM-1
Manual
], [ ] to change the radio

Presetting Stations Automatically

The tuner can automatically seek and store 6 strong stations in the
selected band in order of frequency from low to high.
After selecting the desired band, touch and hold
[A.Memo] for at least 2 seconds.
The tuner automatically seeks and stores 6 strong stations into
the preset buttons in order of frequency from low to high.
When automatic storing has completed, the station stored in the
preset 1 is selected.
• If no stations are stored, the tuner will return to the original station
you were listening to before the automatic storing procedure began.
• You can cancel this process by touching [A.Memo] while the tuner is
automatically seeking stations. Cancelling will return the tuner
preset to the previous setting.

Tuning to Preset Stations

Select the desired preset in any band to tune to the station stored in that
preset number.
1
Touch [ ] repeatedly until the desired band is
displayed.
2
Touch any one of the preset buttons that has a
station stored to it.
The preset station is received.
PTY (Program Type) Tuning (RBDS mode
only)
1
Touch [PTY Search].
The Select PTY list screen is displayed.
2
Touch the selected program type to start searching
for a station of that type.
If no PTY station is found, "No PTY." will be displayed.
3
To select the station in PTY, touch [Tune] repeatedly
during reception of a PTY station to display "PTY."
And then, touch [ ], [ ].
Displaying Radio Text (RBDS mode
only)
Text messages from a radio station can be displayed.
1
Tune in a radio station that transmits text messages.
2
Touch the Info area (
repeatedly to switch to the desired display.
Song Info Mode (PS/PTY/Title Name/Artist Name/Album
Name)
Radio Text Mode (Radio Text)
) (page 10) in FM radio mode
11
-EN