Appliance Setup; Remove Fixed Glass Assembly; Remove The Shipping Materials; Clean The Appliance - Heat & Glo RED40 Owner's Manual

14 14

Appliance Setup

A. Remove Fixed Glass Assembly
See Section 14.H.
B. Remove the Shipping Materials
Remove shipping materials from inside or underneath the
fi rebox. Verify all components are with the fi replace.
C. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the fi rebox or underneath in the control cavity.
D. Accessories
Install approved accessories per instructions included
with accessories. Install approved accessories per in-
structions included with accessories. Contact your dealer
for a list of approved accessories.
WARNING! Risk of Fire and Electric Shock! Use ONLY
Hearth & Home Technologies-approved optional acces-
sories with this appliance. Using non-listed accessories
could result in a safety hazard and will void the warranty.
E. Glass Rock Media Instructions
A Glass Rock Media Kit is available for use with the
RED40 and RED40ST models. Install Glass Rock Media
per instructions included with kit.
F. Porcelain Instructions
A Porcelain Kit is available for use with the RED40 and
RED40ST models. Install Porcelain per instructions in-
cluded with kit.
G. Granite Instructions
A Granite Kit is available for use with the RED40 and
RED40ST models Install Granite per instructions includ-
ed with kit.
Heat & Glo • RED40, RED40ST • 2155-900 Rev. F • 8/09 59