Framing And Clearances; Selecting Appliance Location - Heat & Glo RED40 Owner's Manual

5 5

Framing and Clearances

A. Selecting Appliance Location
When selecting a location for the appliance it is important to
consider the required clearances to walls (see Figure 5.1).
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be locat-
ed out of traffi c and away from furniture and draperies.
E
1 IN.
A
45°
Inches
Millimeters
Figure 5.1 Appliance Locations RED40
A
1 IN.
B
C
TOP VENT
ONE 90° ELBOW
A B
60-3/8 50
1533 1270
Heat & Glo • RED40, RED40ST • 2155-900 Rev. F • 8/09
NOTICE: Illustrations refl ect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
It is important to follow the framing and fi nishing instruc-
tions step by step to ensure proper placement of fi replace
in the surrounding framing/fi nishing materials. For addi-
tional information and considerations for the active con-
vection technology in regards to appliance location and
framing, see Section 9.
B
ALCOVE
INSTALLATION
Note: Consider installation of the active con-
vection blower when determining appliance
location. See Section 9.C for more detailed
information.
TOP VENT
ONE 90° ELBOW
B
C D
85-3/8
See Section D.
Figure 5.6 & 5.7
2168
D
F
E F
24-1/8 18-3/4
613 476
17