Getting Started; Choosing A Location; Installation - Clarity 440 User Manual

PM080404_C440_RevB_E#34CA7F.qxd

CHOOSING A LOCATION

1. This phone requires a modular phone
jack (RJ11C) and a standard 120V AC
wall outlet.
2. Plug the AC Adapter directly into outlet.
3. Do not plug other appliances into the
same outlet or have outlet controlled by a
wall switch.
4. Choose a location that is out of the way of
normal activities.
CAUTION: USE ONLY WITH CLASS 2
(CLASSE 2) POWER SOURCE 9V DC, 400mA.
Always connect the AC Adapter to the phone
before you connect it to the AC power. When
you finish, disconnect the AC power before
you disconnect it from the phone.

INSTALLATION

Connecting Your Telephone
Carefully remove your cordless telephone from
it's box. If there is any visible damage, do not
attempt to operate this equipment. Return it to
the place of purchase.
Check to be sure that you have all items that
come with your telephone. You should have
a HANDSET, BASE UNIT, BATTERY, AC
ADAPTER, TELEPHONE LINE CORD, BELT
CLIP AND OWNERS MANUAL.
8
8/14/04 15:08 Page 8

Getting Started

If at any time you have questions about your
telephone please contact our Customer
Service Department at: 1-800-552-3368 or
423-622-7793.
Table/Desktop Installation
1. Plug one end of the supplied modular
2. Plug the modular telephone line cord's
3. Insert the supplied AC Adapter's plug into
4. Plug the adapter into a standard
5. Lift the base's antenna to a
Bottom view of phone
telephone line cord into the jack marked
TEL located on the back of the telephone
base as shown in the diagram.
other end into a modular phone jack.
the jack marked 9V DC 400mA located
on the back of the telephone base.
120V AC power (electrical) outlet.
vertical position.