Clarity 440 User Manual page 13

PM080404_C440_RevB_E#34CA7F.qxd
Setting LDS CODE
1. After setting Area Code 2, press UP(
button to set LDS Code.
2. The LCD display will show LDS CODE
X
with X digit blinking.
and
3. Enter the LDS number using the numeric
keys on the handset.
4. Press the UP( ) or DOWN (
▲
to go to the next menu.
Setting EASY MODE
1. After setting LDS Code, press UP (
button to set the Easy Mode.
2. The LCD display will show EASY
MODE and 1.ON 2.OFF.
3. Press 1 or 2 to change the mode.
The tick mark will move against the
selected mode.
4. Press the UP ( ) or DOWN (
▲
to change the mode.
Setting VOICEMAIL NO
1. After setting Easy Mode, press UP(
button to set VOICEMAIL Number.
2. The LCD display will show VOICEMAIL
NO and XXX-XXX-XXXX with the last
digit blinking.
3. Enter the voicemail number using the
numeric keys on the handset. Press
DEL/CH key to delete and move cursor
back one place.
4. Press the UP ( ) or DOWN (
▲
to go to the next menu.
8/14/04 15:08 Page 13
Feature Set-up
Setting MESSAGE WAITING ON/OFF
) 1. After setting Voicemail No, press UP (
▲
2. The LCD display will show MESSAGE,
3. Press 1 or 2 button to change
) button
▼
4. Press the UP (
)
▲
Setting AUTOCONNECT ON/OFF
1. After setting Message Waiting Light Off,
2. The LCD display will show AUTOCON-
3. Press 1 or 2 to change or current
) button
▼
4. Press the UP (
)
▲
) button
▼
button to set Message Waiting function
on/off.
WAITING, and 1.ON 2.OFF with a
tick mark against the selected item.
the mode.
) or DOWN (
▲
to go to the next menu.
press UP ( ) button to set AUTOCON-
▲
NECT ON/OFF (default to ON).
NECT, 1.ON 2.OFF.
selected value. The tick mark will move
against the selected value.
) or DOWN (
▲
to go to the next menu.
E
N
G
)
▲
L
I
S
H
) button
▼
) button
▼
13