Lighted Key Pad; Page/Handset Locator; Channel Operation; Security Code - Clarity 440 User Manual

PM080404_C440_RevB_E#34CA7F.qxd
2. Press the key. Keys pressed after
*
this are sent as tone signals.
3. The phone will automatically reset
to rotary (pulse) service after the
call ends.

Lighted Key Pad

The key pad will light for fifteen (15) seconds
after removing the handset from the base. To
reactivate the feature while in standby, press
the TALK or the MEM button. To activate while
the phone is in use, press any key.

Page/Handset Locator

To send a page signal from the base to the
handset, press the PAGE button located on
the base of the telephone. A series of rings
will sound from the handset.
To locate the handset if it is away from the
base, press and hold the PAGE button for
approximately five (5) seconds. A series
of rings will sound. Return the handset
to the base or press any button to cancel
the page.

Channel Operation

The C440 cordless telephone automatically
searches and selects the clearest of 40 chan-
nels when it is being used. If interference
develops on the line, pressing this button
will move to another channel.
8/14/04 15:08 Page 17
Telephone Operations

Security Code

The security code prevents your cordless
phone conversations from being accessed
by a phone on a different line. Once the
handset battery is fully charged, the handset
will automatically select the code from over
65,000 different combinations. The code is
changed every time the handset is placed in
the cradle.
If you have trouble with placing or receiving
calls, a lost security code may be the cause
of the problem. When this occurs, the hand-
set can no longer communicate with the
base. Reset by placing the handset on the
base for 5-10 seconds. If that does not
work, unplug the AC adapter from the wall
outlet. Disconnect the handset battery for
5-10 seconds, and then reconnect. Place
hand-set back on the base and then reinsert
the AC adapter.
E
N
G
L
I
S
H
17