Setting As A Digipeater; Digipeat; Uicheck; Uidigi - Kenwood TM-D710E Instruction Manual

SETTING AS A DIGIPEATER

■ DIGIPEAT

Enter Menu mode and access Menu 616.
When using the TM-D710 as a digipeater, set whether
or not you digipeat a packet which includes your
callsign in the packet path.
In the received packet path, if you have set your
callsign in MY CALLSIGN (Menu No. 600), the digipeat
completion flag ( ) is added to your callsign and will
then process the relay. (For example, "JA1YKX-1"
"JA1YKX-1 ".)

■ UICHECK

Enter Menu mode and access Menu 617.
This function will not relay a one-time received UI frame
within the set UICHECK time. This is effective for each of
UIDIGI, UIFOOD, and UITRACE.
UI frame (Unnumbered Information frame)
Data can be transferred and the APRS beacon, etc., can
be used without making a connection. UIDIGI, UIFLOOD,
and UITRACE are all specialized UI frame relay processing
modes.

■ UIDIGI

Enter Menu mode and access Menu 618.
When using the TM-D710 as a digipeater, set whether
or not UI digipeat is run.
When receiving a UI frame that matches your entered
character string alias (RELAY, WIDE 1-1, etc.) of the
beginning part of the packet path that has not yet been
digipeated, the digipeat completion flag ( ) is added to
your callsign (the callsign you set up in MY CALLSIGN)
and the relay will begin processing. (For example
"WIDE 1-1" "JA1YKX-1 ", etc.)
>
1 Rotate the Tuning control to switch the function ON,
then press the Tuning control.
2 Rotate the Tuning control to select
press the Tuning control.
• The display for entering a path appears; the first digit
blinks.
• You can enter 0 to 9, A to Z, , (comma), and –.

■ UIFLOOD

>
ALIASES", then
"
APRS-17
When using the TM-D710 as a digipeater, set whether
or not UIFLOOD digipeat runs.
When the received UI Frame character string matches
the entered alias (for example, CA), the number of
hops (for example, 2-2) is processed and decreased by
1 (for example, CA2-2 becomes CA2-1).
Enter Menu mode and access Menu 619.
1 Set UIFLOOD to [ON] or [OFF].
2 Press the Tuning control.
• You enter Alias Setting mode.
3 Enter the UIFLOOD alias.
• When running UIFLOOD digipeat, set the character
string of the alias that is used.
4 Press the Tuning control.
• You enter UIFLOOD SUBSTITUTION Setting mode.
5 Set one of [ID], [NOID], or [FIRST].
[ID]: Your station callsign is embedded. When there is
already a callsign in the relayed UI frame, your station
callsign will replace the existing callsign.
[NOID]: The callsign is not embedded or replaced.
[FIRST]: When there is no callsign in the relayed UI
frame, your station callsign is embedded. When there is
already a callsign in the relayed UI frame, the callsign is
not embedded or replaced.