Uitrace; Storing User Phrases; Storing Auto Message Reply; Auto Answer Reply <Reply - Kenwood TM-D710E Instruction Manual

■ UITRACE

When using the TM-D710 as a digipeater, set whether
or not UITRACE digipeat runs.
When the received UI Frame character string matches
the entered alias (for example, WIDE), the number of
hops (for example, 2-2) is processed and decreased by
1 (for example, WIDE2-2 becomes WIDE2-1), and your
station callsign is added to the UI Frame.
Enter Menu mode and access Menu 620.
1 Set UITRACE to [ON] or [OFF].
2 Press the Tuning control.
• You enter Alias Setting mode.
3 Enter the UITRACE alias.
• When running UITRACE digipeat, set the character
string of the alias that is used.

STORING USER PHRASES

Enter Menu mode and access Menu 621.
This function (clipboard image) allows you to paste
phrases into the APRS message compilation mode. You
can create up to 4 phrases each of which can consist of
up to 32 characters.
• The user phrase function can only be used in the message
compilation mode.
• Before a message is copied, the number of letters cannot
be guaranteed. Only the number of letters available will be
copied, the remainder will be truncated.
• To copy a message, enter message compilation mode, press
[F] to enter function mode, then press [PASTE1], [PASTE2],
[PASTE3], or [PASTE4] to copy the message that has been
set up for each key.
• If the user messages [PASTE1], [PASTE2], [PASTE3], and
[PASTE4], are not set up, they cannot be used.

STORING AUTO MESSAGE REPLY

Enter Menu mode and access Menu 622.
■ Auto Answer Reply <REPLY>
While you are driving, for example, you cannot
immediately answer to received messages. On this
transceiver, you can program the message to be
automatically returned when a message is received.
You can choose from the following delay times: [ON
(DELAY TIME NONE)], [ON (DELAY TIME 10 sec)],
[ON (DELAY TIME 30 sec)]. As an example, when
selecting [ON (DELAY TIME 10 sec)], your auto
response message will be transmitted approximately
10 seconds after having received a message.
• The auto response message will be cancelled if
you operate the transceiver before the delay time
expires, after having received a message.
• "AA:" (Auto Answer) is automatically added to the
top of the auto response message.
1 Rotate the Tuning control to select "ON (DELAY
TIME NONE)", "ON (DELAY TIME 10 sec)", or "ON
(DELAY TIME 30 sec)", then press the Tuning
control.
2 Rotate the Tuning control to select "TEXT", then
press the Tuning control.
• The display for entering a message appears; the first digit
blinks.
• You can enter alphanumeric characters plus special
ASCII characters.
■ Reply To Callsign <REPLY TO>
When there is a message you would like to reply to for
the specific callsign, preset that callsign for automatic
responses.
APRS-18