Paging Code Memory; Setting Paging Codes - Kenwood TH-28A Instruction Manual

2 Paging Code Memory
There are 11 paging code memories.
Memory Code Use
A Stores your station ID code in memory.
Automatically stores the calling station's
(@) code during reception. Can temporarily set
the code for the station to be called.
Stores group codes and local station codes
in memory.
3 Setting Paging Codes
First, you must program your Individual Code into
Memory A.
1 Press the F key then press the 1 key.
Press and hold the F key for longer than one
second, then press the 1 key to enter the code
setting mode.
Rotate the tuning control to select A (your individual
code channel).
Enter your individual code (000 to 999) using the
numeric keys.
5 Your station ID is set in memory A.
6 Select 1 to 9 with the tuning control.
7 Enter the next Paging Code Memory you wish to
program as described in step 4.
Press the M key to exit the code setting mode.
37