Tone Frequency; Setting; Release - Kenwood TM-3530A Instruction Manual

3) [T] indicator lights.
1) @ Select the tone
frequency.
TM-2550A
[ea
a
aed |
v
2) © TONE switch ON.
@® Store in memory.
® [T] indicator will go OFF.
6) MEMORY CHANNEL selector
oo [ex]
Keita)
fe:
@®@ Release.
20
4-6-2. Tone frequency
(TM-3530A/2570A/2550A/2530A only)
(The tone unit TU-7 option is required for this function.)
1. Setting
@ Turn the MEMORY CHANNEL selector to select the
desired memory channel.
(When in the key mode you may ignore this step.)
@ Press the TONE switch. The display will indicate the
CTCSS tone frequency, or" = -—-—
@ Turn the MEMORY CHANNEL solecton to select a tone
frequency from the 38 possible frequencies. The [T
indicator will light.
@®To store the tone frequency into a memory channel,
press the |M/|key.
(This step may be ignored when in the key mode.)
@® Press the TONE switch to return to the frequency dis-
play mode. When transmission is begun in this mode,
the tone frequency currently selected will be transmit-
ted.
Example: To store tone frequency 88.5 Hz in memory
CH5
@ Set the M.CH switch to memory mode (so that the
MEMORY CHANNEL selector is illuminated) and turn
the MEMORY CHANNEL selector to display "5" in the
memory channel display indicator.
@ Press the TONE switch.
@Turn the MEMORY CHANNEL selector to display
"88.5 Hz" in the tone frequency display. The [T] indi-
cator will light.
@ Press the [M] key, to complete the storage of the tone
frequency.
© Press the TONE switch to return to normal frequency
display mode.
2. Release
@ Instead of step @ above, press the [C] key or rotate
the MEMORY CHANNEL selector to display" -—-—".
The |T | indicator will go OFF.
@To release the tone frequency stored in memory,
press the [C] key.
Available CTCSS tone frequencies