You can chose from the following encrytion types: WEP, WPA, WPA2, WPA + WPA2
Encryption key:
Enter the password that is used to secure the wireless connection. Please note that the password is case
sensitive. As an alternative method you can use the virtual keyboard as well. Just press the green Options-
Button to activate it.
To save the settings and activate the network connection press the OK-Button . After a short while a window
will open telling you if the connectoion attempt was successful or not. If everything went well a green Symbol
will appear next to "Link:" in the "Network configuration" window.
Virtual Keyboard
Namserver settings, Network test, Restart network, Network wizard
For further information on these options refer to chapter 11.6.1 "Integrated Ethernet".
partially successful wireless network test
11.7 Common Interface
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option "Setup" and press the OK-Button to select.
1. Navigate to the option "Common Interface" and press the OK-Button.
• The "Common Interface" menu will open up.
-57-
Use the Navigation-Buttons up/down/left/right to select a charac-
ter and press the OK-Button to enter it into the text field.
Once you have enterred the complete encryption key press the
green Options-Button so save the key or the r ed Options-Button
to discard it.