U s e r M a n u a l D r e a m b o x D M 7 0 2 5
8.8
Common Interface
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD
menu. Navigate to the option "Setup" and press the OK-Button to select.
Navigate to the option "Common Interface" and press
the OK-Button.
Reset:
This options resets your CI-Module. This function is
needed if you are experiencing trouble with one of
your encrypted services.
Init:
This option initializes an inserted Smartcard. It is
recommended to inset the CI-Module with the
Smartcard already in it.
No module found:
No CI-Module is inserted into the slot. If you have
inserted one the name and firmware version will
show.
Navigate to this option and press the OK-Button to
get to the extended options of the inserted CI-
Module. The option strongly depend on the type of
module inserted and therefore will not be explained
in detail.
The Exit-Button will quit this menu.
- 54 -
english