DREAM MULTIMEDIA Dreambox DM 8000 HD PVR DVD Menu Overview page 46

You have the following options:
Teletext - Selection:
Select the "Search" option and press the OK-Button to start searching for Teletext information on other ser-
vices without having to leave the service that you currently are watching. After the search is finished you can
use the Navigation-Buttons left and right to select the Teletext of another service without having to switch
services. Press the OK-Button to select the desired Teletext. This option is only available if more than one
service on the current satellite transponder actually transmits Teletext information. If this is not the case you
cannot make a selection.
Screen format:
Standard mode 16:9 = on/off
Enabling this shows the TuxText in 16:9 Aspect Ratio. Press the OK-Button to enable or disable this
option. The default setting is disabled.
Text/TV mode 16:9 = on/off
Enabling this, switches the TV to 16:9 Aspect Ratio if the PIG-Mode is activated with the Volumedown-
Button. Press the OK-Button to enable or disable this option. The default setting is disabled.
Note:
On some older 4:3 TV's these Modes may not work. If enabled, it could happen, that your TV switches
away from the VCR or A/V socket.
If you are using a 4:3 TV, we suggest not to enable these modes.
Brightness:
Here you can adjust the brightness of your Teletext. Press the Navigation-Buttons left or right to adjust
the brightness.
Transparency:
Here you can adjust the transparency value of your Teletext. Press the Navigation-Buttons left or right
to adjust the alpha value.
National characterset:
automatic recognition = on/off
The national codepage detection is used to display the teletextpages with the right letterset for your
location. Press the OK-Button to enable or disable this option. The default setting is enabled. If
disabled, use the Navigation-Buttons left or right, to choose your codepage.
For further information see www.tuxtxt.net
-46-
Teletext configuration menu:
If the Teletext page 100 is shown you can press the MENU-Button
to enter the Teletext configuration menu.