Hard Disk Operation; Management; Initialization - DREAM MULTIMEDIA Dreambox DM 8000 HD PVR DVD Menu Overview

Protecting the parental lock setup
Additionally you have the option to protect the parental control menu using a pincode.

7. Hard disk operation

7.1 Management

If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option "Setup" and press the OK-Button to select.
1. Navigate to the option "System" and press the OK-Button
•The "System" menu will open up.
2. Navigate to the option "Harddisk..." and press the OK-Button
3. Navigate to the "Harddisk setup" option and press the OK-Button

7.1.1 Initialization

If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option "Setup" and press the OK-Button to select.
1. Navigate to the option "System" and press the OK-Button
• The "System" menu will open up.
2. Navigate to the option "Harddisk..." and press the OK-Button
3. Navigate to the "Harddisk setup" option and press the OK-Button
-37-
Setting the "Protect setup" option to yes you will only be able to
change parental control setting after you have entered the correct
pincode.
Once you entered the wrong pincode three times in a row you have
to wait 15 minutes before you can try again.
Note: You can use two different pincodes to protect the setup
and the service list.
You now can set the duration of time after which the harddisk will
be put into standby-mode.
You can select from:
- No standby
- 10 or 30 seconds
- 1, 2, 5, 10, 20 or 30 minutes
- 1, 2 or 4 hours
Once you have selected the desired time press the OK-Button or
the green Options-Button to get back into the harddisk menu.