Numeric-Keypad
Enter a service number to directly access the option by using the Numeric Keypad . The service numbers are
on the left side of the service list.
The Numeric Keypad can also be used to enter the teletext page number when you are in TV-Control-Mode
and if your TV is teletext capable. The TV station has to submit teletext information; otherwise this feature
cannot be used.
Arrow-Left-Button
The Arrow-Left and Arrow-Right-Button enable you to jump back and forth between the last 20 channels
you have watched. If you have selected a sub service (see chapter 4.6) you can use these buttons to switch
to the next sub service.
Mute-Button
Pressing the MUTE-Button mutes the Volume. A crossed speaker symbol will appear on the TV screen.
Pressing it again or pressing one of the Volume +/- Buttons brings back the audio.
The Mute-Button deletes a character during text input.
EXIT-Button
You can leave all menus and service lists by pressing the EXIT-Button .
Volume +/- Buttons
The Volume +/- Buttons control the volume of the audio. Pressing + will make turn it up and pressing - will
turn it down.
Bouquet +/- Buttons
Pressing the Bouquet +/- Buttons will jump back and forth between the bouquets.
INFO-Button
If no OSD menu is visible on the screen and you are in TV or RADIO-Mode, pressing the INFO-Button will
reveal the EPG information of the chose channel if it is available.
Navigation-Buttons
In general the menus are controlled using the Navigation-Buttons on your remote control.
To get into a submenu you have to press the OK-Button .
Arrow-Right-Button
-13-