Canon FAX-L360 User Manual page 310

POLLING BOX
For details on accessing the settings below, see page 15-13.
The selectable settings and the default settings vary depending on the country where you have
purchased the FAX. The values shown here are average values.
Setting
1.SETUP FILE
FILE NAME
PASSWORD
TX PASSWORD
ERASE AFTER TX
2.CHANGE DATA
PASSWORD
3.DELETE FILE
PASSWORD
15-14 The Menu System
Description
Set up a polling box to hold a document until it is polled by and
sent to another fax machine (See page 9-6.).
Enter a file name (24 characters).
Enter a password to protect the polling box settings.
Enter a 20-digit (max.) standard ITU-T password.
Tell the FAX-L360 how to handle the document after it is polled
and sent.
ON: Document is erased from the memory after it is polled and
sent.
OFF: Document is not erased and remains in the memory after it
is polled and sent.
Change the settings on the polling box. You can now change any
of the settings listed in the table above (1.SETUP FILE) (See
page 9-6.).
Enter the password of the polling box. You can now change any of
the settings listed in the table above (1.SETUP FILE)
(See page 9-6.).
Delete the polling box file.
Enter the password of the polling box file to delete.
Sub-Settings
–
–
0000 to 9999
–
ON
OFF
–
–
–
–
Chapter 15