Table of Contents
Advertisement
Authentication
Disable Local Authentication
Selecting this option disables login authentication on the KN1108v /
KN1116v switch. The switch can only be accessed using LDAP, LDAPS,
MS Active Directory, RADIUS or CC Management authentication.
RADIUS Settings
To allow authentication and authorization for the KN1108v / KN1116v
switch through a RADIUS server, do the following:
1. Check Enable.
2. Fill in the IP addresses and service port numbers for the Preferred and
Alternate RADIUS servers. You can use the IPv4 address, the IPv6
address or the domain name in the IP fields.
3. In the Timeout field, set the time in seconds that the KN1108v /
KN1116v switch waits for a RADIUS server reply before it times out.
4. In the Retries field, set the number of allowed RADIUS retries.
5. In the Shared Secret field, key in the character string that you want to
use for authentication between the KN1108v / KN1116v switch and the
RADIUS Server. A minimum of 6 characters is required.
Chapter 8. Device Management
152
Advertisement
Table of Contents
